LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1985 >> 380SL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Rear Axle Seal >> Installation

Rear Axle Seal: Installation

  1. Coat inside of new axle seal lip and wheel bearings with grease. Install bearings and seal into rear brake rotor.
  2. Coat axle splines with heat resistant lubricant, and install rotor. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals