LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1985 >> 190D Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel & Column Switches >> Removal & Installation >> Horn Pad & Steering Wheel >> Removal (Plastic Wheel)

Removal (Plastic Wheel)

  1. Disconnect battery ground cable. Remove vehicle emblem from horn pad. Remove steering wheel retaining nut.
  2. Pull wheel from shaft with pad still attached. Unscrew hex nuts on back side of wheel. Separate steering wheel from pad.
    NOTE: Horn wire is still attached to steering wheel.
  3. Detach horn wire from contact ring. Remove steering wheel. Remove countersunk screws from steering wheel hub and centering pad of contact ring.
  4. Remove horn ring from steering wheel. Remove locking ring from hub of pad. Remove slip ring.
scientia non olet · About LEMON Manuals