Starter Does Not Work
STARTER DOES NOT WORK (NJ8A(X)-EC/NN8A(X)-EC/MM8A(X)-EC) DESCRIPTION AND POSSIBLE CAUSE
| Description |
- Starter does not work even when in P or N position.
|
| Possible cause |
- Malfunction in wiring harness (including connector/terminal) between selector lever and body control module (BCM) (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- Malfunction in wiring harness (including connector/terminal) between selector lever and PCM (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- Engine control system malfunction
(See SYMPTOM TROUBLESHOOTING [H3T]
.)
|
 Courtesy of MAZDA MOTORS CORP.
|
| 1 |
Selector lever |
| 2 |
Body control module (BCM) |
| 3 |
PCM |