Engine Stalls When Shifted To D Or R Position
ENGINE STALLS WHEN SHIFTED TO D OR R POSITION (NJ8A(X)-EC/NN8A(X)-EC/MM8A(X)-EC) DESCRIPTION AND POSSIBLE CAUSE
| Description |
- Engine stalls when shifting from N or P position to D or R position at idle.
|
| Possible cause |
- Initial learning is not completed. (See INITIAL LEARNING [MM8AX-EC]
.)
- Idle speed control malfunction (See SYMPTOM TROUBLESHOOTING [H3T]
.)
- Automatic transmission malfunction (automatic transmission internal parts malfunction) (Refer to [AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION
]
).
|
| System wiring diagram |
|