LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> Transmission >> Automatic Trans >> On-Board Diagnostic - Automatic Transaxle (Mm8AX-EC) >> DTC P163E-00: TCM Configuration Not Performed

DTC P163E-00: TCM Configuration Not Performed

System malfunction location TCM configuration not performed
Detection condition
  • TCM configuration is not implemented.
Fail-safe
  • Not applicable
Possible cause
  1. TCM configuration is not implemented. (After automatic transmission replacement) (See CONFIGURATION.)
Repeatability verification procedure
  1. Clear the DTC recorded in the memory. (See CLEARING DTC .)
  2. Perform the following procedure to ensure that the DTC has been resolved:
    • Switch the ignition ON (engine off or on).
System wiring diagram
  • Not applicable
scientia non olet · About LEMON Manuals