| Detection condition |
- he TCM detects malfunctioning automatic transmission operation.
|
| Fail-safe |
- Inhibit driving (neutral).
|
| Possible cause |
- Control valve body malfunction (TCM malfunction) (Refer to [CONTROL VALVE BODY REMOVAL/INSTALLATION
] in service information).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the following procedure to ensure that the DTC has been resolved:
- Drive the vehicle. (Use all gears from 1st to 8th gear and R position)
|
| System wiring diagram |
|