| Detection condition |
- Output value of the parking position sensor is not within the detection range.
|
| Fail-safe |
- Inhibits i-stop control. (Without Mazda M Hybrid boost)
- Inhibits AAS.
|
| Possible cause |
- Malfunction in the following control valve body component parts (Refer to [CONTROL VALVE BODY REMOVAL/INSTALLATION
] in service information).
- Parking position sensor
- Parking position sensor circuit
- Malfunction in the following automatic transmission component parts (Refer to [AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION
] in service information).
- Parking position sensor target
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the following procedure to ensure that the DTC has been resolved:
- Switch the ignition ON (engine off or on).
|
| System wiring diagram |
|