| Detection condition |
- Parking position sensor is unlocked.
Precondition
- Selector lever is in P position.
- When the ignition is switched from ON to off.
|
| Fail-safe |
- Turns the parking lock solenoid valve on.
|
| Possible cause |
- Control valve body malfunction (ON/OFF solenoid valve No. 2 malfunction) (Refer to [CONTROL VALVE BODY REMOVAL/INSTALLATION
] in service information).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the following procedure to ensure that the DTC has been resolved:
- Drive the vehicle under the following condition:
- Vehicle speed: 10 km/h {6.2 mph} or more
- Shift the selector lever to the P position.
- Switch the ignition ON to off.
|
| System wiring diagram |
|