LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Motor Systems >> On-Board Diagnostic - Drive Motor Control Module (E-SKYACTIV PHEV) >> DTC B1048-00: Brake Fluid Level Sensor

DTC B1048-00: Brake Fluid Level Sensor

B1048-00: (SGC2/DMCM (E-SKYACTIV PHEV)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Brake fluid level sensor
Detection condition
  • The drive motor control module detects that the electronically controlled brake unit stores the following DTC.
    • B1048-23:
Fail-safe
  • Not applicable
Possible cause
  1. DTCs are stored in the electronically controlled brake unit. (See DTC TABLE [DSC] .)
    NOTE:
    • If the electronically controlled brake unit stores a DTC, the drive motor control module stores the same DTC or similar.
    • If the drive motor control module stores a DTC even though the electronically controlled brake unit does not store a DTC, clear the DTC as it was for a past malfunction, and then complete the repair.
Repeatability verification procedure
  1. Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram
  • Not applicable