Quick release connector (fuel system) No. 5 disconnection note
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- When releasing the retainer, be careful not to damage the fuel pipe.
NOTE:
- If the quick release connector is disconnected, replace the retainer with a new one.
- Hold the quick release connector parallel with your fingers.SYMBOL AND CONTENT DESCRIPTION
Symbol Content Retainer NOTE:- Press the tabs in the center of the retainer and remove the quick release connector.
- The retainer remains attached to the fuel pipe even if the quick release connector is disconnected.
- Press the retainer with your fingers while holding the center of the retainer tabs.
- Pull the connector side to disconnect the quick release connector.
- Protect the disconnected quick release connector and fuel pipe by wrapping them in plastic to prevent damage or soiling.