LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission System (VIN A)) >> Quick Release Connector (Emission System) Removal/Installation [PYUL] >> Verify Quick Release Connector (Emission System) Positions

Verify Quick Release Connector (Emission System) Positions

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • If there is foreign matter on the connecting area of the quick release connector it might damage the connector opposite side. To prevent this, disconnect the quick release connector and clean the connecting area before connecting it again.
  • Verify the type and position and install/remove correctly
G16704108Courtesy of MAZDA MOTORS CORP.
COMPONENT OPERATIONS

Component no Refer to
1 Quick release connector (emission system) No. 1
2 Quick release connector (emission system) No. 2
3 Quick release connector (emission system) No. 3
4 Quick release connector (emission system) No. 4
5 Quick release connector (emission system) No. 5
6 Quick release connector (emission system) No. 6
7 Quick release connector (emission system) No. 7
8 Quick release connector (emission system) No. 8
9 Quick release connector (emission system) No. 9
scientia non olet · About LEMON Manuals