LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission System (VIN A)) >> Fuel Tank Shut Valve Removal/Installation [PYUL] >> Remove Fuel Tank Pressure Sensor >> Evaporative isolation valve hose connection note

Evaporative isolation valve hose connection note

WARNING: This page is about a different variant/trim than selected.
  1. Connect the evaporative isolation valve hose as shown in the figure below.
G16704036Courtesy of MAZDA MOTORS CORP.