LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission System (VIN A)) >> Fuel Shut-Off Valve Removal/Installation [PYUL] >> Disconnect Water Heater Component >> Clip removal note

Clip removal note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the clips as shown in the figure below.
Fig 1: Water Heater Clip And Nuts With Torque Specification
G16703948Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Symbol Content
(1) (2)... Servicing procedure
11 N.m {110 kgf.cm, 95 in.lb}