LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Emission System (VIN A)) >> Evaporative Isolation Valve Removal/Installation [PYUL] >> Remove Main Silencer

Remove Main Silencer

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Main Silencer Components Location With Torque Specification
G16703825Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATION

Step Part name
1 Nut Replacement part 44.5 N.m {4.55 kgf.m, 32.8 ft.lb}
2 Rubber - -
3 Main silencer - -
4 Gasket Replacement part -
5 Stud - 20 N.m {2.05 kgf.m, 14.75 ft.lb}
scientia non olet · About LEMON Manuals