DTC U2500-00: Forward Sensing Camera (FSC) Error (PYUL)
WARNING: This page is about a different variant/trim than selected.
U2500: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Forward sensing camera (FSC) error |
| Detection condition |
- The PCM detects a communication error with the forward sensing camera (FSC).
|
| Fail-safe |
- Inhibits engine-stop by i-stop control.
|
| Possible cause |
- Malfunction in wiring harness (including connector/terminal) between forward sensing camera (FSC) and PCM (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- Forward sensing camera (FSC) malfunction (Refer to [FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION
]
).
- PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION
]
).
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the KOEO or KOER self test. (See DTC INSPECTION
.)
|
 Courtesy of MAZDA MOTORS CORP.
|
| 1 |
PCM |
| 2 |
BCM |
| 3 |
Forward sensing camera (FSC) |