Details On DTCs

WARNING: This page is about a different variant/trim than selected.

U0322: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Body control module (BCM) error
Detection condition	Determination conditions	Any one of the following conditions is met: CAN communication line malfunction between body control module (BCM) and PCM Body control module (BCM) internal malfunction
	Preconditions	The following conditions continue for 1.5 s: Battery voltage: 9.45 V or more 1 1: Standard can be verified by displaying PIDs using M-MDS
	Malfunction determination period	2 s period
	Drive cycle	1
	Self test type	CMDTC self test, KOEO self test, KOER self test
	Sensor used	PCM
Fail-safe	Inhibits engine-stop by i-stop control.
Vehicle status when DTCs are output	Not applicable
Possible cause	CAN drive error (body control module (BCM) or PCM) Malfunction in wiring harness (including connector/terminal) between body control module (BCM) and PCM Body control module (BCM) malfunction PCM malfunction