DTC U0075-00: Can System Communication Error (PYUL)

WARNING: This page is about a different variant/trim than selected.

U0075: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	CAN system communication error
Detection condition	Malfunction in CAN bus communication line.
Fail-safe	Inhibits engine-stop by i-stop control.
Possible cause	CAN bus communication line error NOTE: Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)] .) PCM malfunction (Refer to [PCM REMOVAL/INSTALLATION ] ).
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System Wiring Diagram	Not applicable