LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel System (VIN A)) >> High Pressure Fuel Pump Removal/Installation [PYUL] >> Remove High Pressure Fuel Pump >> Notes

Remove High Pressure Fuel Pump: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
G16702533Courtesy of MAZDA MOTORS CORP.
PART NAME DESCRIPTION

Step Part name
1 Connector - - -
2 Bolt - - 22 N.m {2.25 kgf.m, 16.25 ft.lb}
3 High pressure fuel pump
(See HIGH PRESSURE FUEL PUMP INSTALLATION NOTE )
- - -
4 Seal rubber - Replacement part -
5 O-ring Engine oil Replacement part -
6 Tension collar Engine oil - -