LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel System (VIN A)) >> Fuel-Filler Pipe Removal/Installation [PYUL] >> Perform Fuel Siphoning Procedure >> If fuel pump does not operate (with less than 1/4 of fuel remaining)

If fuel pump does not operate (with less than 1/4 of fuel remaining)

WARNING: This page is about a different variant/trim than selected.
NOTE:
  1. Remove the rear seat cushion. (See THIRD-ROW SEAT CUSHION REMOVAL/INSTALLATION .)
  2. Remove the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION [PYUL] ).
  3. Siphon the fuel in the fuel tank.
  4. Install in the reverse order of removal.
  5. Perform Fuel Leakage Inspection Referring to [AFTER SERVICE PRECAUTION]. (See AFTER SERVICE PRECAUTION [PYUL] ).