LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel System (VIN A)) >> Fuel Pump Unit Disassembly/Assembly [PYUL] >> Disconnect Quick Release Connector (Fuel System) No. 4 >> Quick release connector (fuel system) No. 4 connection note >> Reassembling the fuel hose (when not replacing fuel hose)

Reassembling the fuel hose (when not replacing fuel hose)

WARNING: This page is about a different variant/trim than selected.
  1. Press the fuel hose into the opposite pipe parallel until a click sound is heard and connect.
  2. Press the retainer down with your fingers.
    • If the retainer cannot be pressed down, press the quick release connector further into the opposite pipe.
  3. Press and pull the quick release connector forward/back several times and verify that it is connected securely.
scientia non olet · About LEMON Manuals