LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel System (VIN A)) >> Fuel Injector Removal/Installation [PYUL] >> Remove Fuel Injectors >> Teflon seal removal note

Teflon seal removal note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the teflon seals as shown in the figure below.
    NOTE:
    • When stretching the teflon seals, do not damage the fuel injector with the tool.
    G16702346Courtesy of MAZDA MOTORS CORP.
SYMBOL AND CONTENT DESCRIPTION

Symbol Content
(1) (2)... Servicing procedure