Remove Engine Compartment Insulator (Upper): Notes

WARNING: This page is about a different variant/trim than selected.

Remove in the order indicated in the table.

Fig 1: Engine Compartment Insulator (Upper) Screws With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

TIGHTENING TORQUE SPECIFICATIONS

Step	Part name
1	Screw (See SCREW INSTALLATION NOTE )	9.5 N.m {95 kgf.cm, 82 in.lbf}
2	Fastener	-
3	Engine compartment insulator (upper)	-