LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel System (VIN A)) >> Fuel Draining Procedure [002] >> Remove Service Hole Cover >> Screw installation note

Screw installation note

WARNING: This page is about a different variant/trim than selected.
  1. Install the screws as shown in the figure below.
    Fig 1: Service Hole Cover Screws With Torque Specifications
    G16702220Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATIONS

    Symbol Content
    2.5 N.m {25 kgf.cm, 22 in.lbf}
    2.5 N.m {25 kgf.cm, 22 in.lbf}
    2.5 N.m {25 kgf.cm, 22 in.lbf}
scientia non olet · About LEMON Manuals