LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (VIN A) (2 Of 6)) >> Electric Variable Valve Timing Actuator Removal/Installation [PYUL] >> Remove Intake Oil Shower Pipe >> Bolt installation note

Bolt installation note

WARNING: This page is about a different variant/trim than selected.
  1. Install the bolts using the procedure shown in the figure below.
Fig 1: Intake Oil Shower Pipe Bolts Tightening Sequence
G16700187Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Symbol Content
(1) (2)... Servicing procedure
10.5 N.m {107 kgf.m, 93 ft.lb}
9 N.m {92 kgf.m, 80 ft.lb}
scientia non olet · About LEMON Manuals