Water Pump Drive Belt
WARNING: This page is about a different variant/trim than selected.
NOTE:
- The water pump drive belt deflection/tension inspection is not necessary with the adoption of the stretch-type water pump drive belt.
- Inspect the inner and outer sides of the belt for wear, damage, or cracks visually or by touching with a hand.
- If any minor wear, damage, or crack is found, replace the water pump drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [PYUL] )
- Switch the main power ON (READY ON) and verify that no abnormal noise is generated.
- If abnormal noise occurs, replace the water pump drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [PYUL] )