LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (VIN A) (2 Of 6)) >> Cylinder Head Removal/Installation [PYUL] >> Remove Passenger Side Front Deflector >> Fastener removal note

Fastener removal note

WARNING: This page is about a different variant/trim than selected.
  1. Partially peel back the front over fender upper until the fasteners can be removed as shown in the figure below.
    • the figure below shows the left side (same as right side).
    G16699856Courtesy of MAZDA MOTORS CORP.
  2. Remove the fasteners.
scientia non olet · About LEMON Manuals