LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> i-stop OFF SWITCH REMOVAL/INSTALLATION [PYUL] >> Remove Driver Side Lower Panel >> Driver side lower panel removal note

Driver side lower panel removal note

WARNING: This page is about a different variant/trim than selected.
  1. Partially peel back the seaming welt until the driver side lower panel can be removed.
  2. Remove the driver side lower panel as shown in the figure.
    G16707753Courtesy of MAZDA MOTORS CORP.
    SYMBOL AND CONTENT DESCRIPTION

    Symbol Content
    (1) (2)... Servicing procedure
  3. Detach the tab on the hood release lever from the driver side lower panel as shown in the figure.
    G16707754Courtesy of MAZDA MOTORS CORP.
    SYMBOL AND CONTENT DESCRIPTION

    Symbol Content
    (1) (2)... Servicing procedure
  4. Disconnect the connector shown in the figure.
G16707755Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals