LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> Throttle Position (TP) Sensor Removal/Installation [PYUL] >> Remove Throttle Body

Remove Throttle Body

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
    Fig 1: Throttle Body Bolt With Torque Specifications
    G16702141Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATIONS

    Step Part name
    1 Connector - -
    2 Bolt - 9.5 N.m {97 kgf.cm, 84 in.lbf}
    3 Throttle body - -
    4 Gasket Replacement part -
scientia non olet · About LEMON Manuals