LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> Pcm Removal/Installation [001] >> Remove The Backup Power Supply Unit

Remove The Backup Power Supply Unit

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Backup Power Supply Unit Nut With Torque Specifications
G16707713Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Nut 9.5 N.m {97 kgf.cm, 84 in.lbf}
2 Connector -
3 Backup power supply unit -
scientia non olet · About LEMON Manuals