Remove Mass Air Flow Sensor/Intake Air Temperature Sensor No. 1

NOTE:

• The MAF sensor and IAT sensor No. 1 cannot be removed individually. When replacing the MAF sensor or IAT sensor No. 1, replace the MAF sensor/IAT sensor No. 1.

1. Remove in the order indicated in the table.

Fig 1: MAF/IAT Sensor No. 1 Screw With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

TIGHTENING TORQUE SPECIFICATIONS

Step	Part name
1	Connector	0.5 N.m {7 kgf.cm, 6 in.lbf}
2	Screw	-
3	MAF/IAT sensor No. 1	-