LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> Knock Sensor (KS) Removal/Installation [PYUL] >> Remove Passenger's Side Windshield Wiper Arm And Blade >> Notes

Remove Passenger's Side Windshield Wiper Arm And Blade: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove using the procedure shown in the figure.
Fig 1: Passenger'S Side Windshield Wiper Arm And Blade Nut With Torque Specifications
G16707637Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Nut 25.5 N.m {2.6 kgf.m, 18.8 ft.lbf}
2 Passenger's side windshield wiper arm and blade
(See Passenger's side windshield wiper arm and blade installation note ).
-