LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> Fuel Vapor Temperature Sensor Removal/Installation [PYUL] >> Remove Middle Pipe

Remove Middle Pipe

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Middle Pipe Nut With Torque Specifications
G16707508Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Nut Replacement part 44.5 N.m {4.55 kgf.m, 32.8 ft.lbf}
2 Rubber - -
3 Middle pipe - -
4 Gasket Replacement part -
scientia non olet · About LEMON Manuals