LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (VIN A) (2 Of 2)) >> Fuel Vapor Temperature Sensor Removal/Installation [PYUL] >> Disconnect Water Pipe >> Notes

Disconnect Water Pipe: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect in the order indicated in the table.
Fig 1: Water Pipe Bolt With Torque Specifications
G16707547Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Bolt 9.5 N.m {97 kgf.cm, 84 in.lbf}
2 Clip -
3 Water pipe
(See Water pipe disconnection note ).
-