Disconnect Quick Release Connector (Emission System) No. 7: Notes
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- If there is foreign matter on the connecting area of the quick release connector it might damage the connector opposite side. To prevent this, disconnect the quick release connector and clean the connecting area before connecting it again.
- Disconnect in the order indicated in the table.
PART NAME DESCRIPTION
| Step | Part name | |
|---|---|---|
| 1 | Quick release connector (emission system) No. 7 (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) NO. 7 DISCONNECTION NOTE ) (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) NO. 7 CONNECTION NOTE ) |
Engine oil |