LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Fuel Pressure Sensor Removal/Installation [PYUL] >> Remove Service Plug >> Service plug installation note

Service plug installation note

WARNING: This page is about a different variant/trim than selected.
  1. Insert the service plug completely.
    G16695038Courtesy of MAZDA MOTORS CORP.
  2. Press the lever down completely.
    G16695039Courtesy of MAZDA MOTORS CORP.
  3. Slide the lock in the direction of the arrow shown in the figure below.
G16695040Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals