LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Fuel Pressure Sensor Removal/Installation [PYUL] >> Remove High Pressure Fuel Pipe

Remove High Pressure Fuel Pipe

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: High Pressure Fuel Pipe Flare Nut And Bolt With Torque Specifications
G16707406Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Flare nut - 29.5 N.m {3 kgf.m, 21.75 ft.lb}
2 Bolt - 9.5 N.m {97 kgf.cm, 84 in.lb}
3 High pressure fuel pipe Replacement part -
scientia non olet · About LEMON Manuals