Function Inspection
WARNING: This page is about a different variant/trim than selected.
- Display the PID [FUEL_PRES]. (Refer to [PID/DATA MONITOR INSPECTION ] in the Troubleshooting Service Information)
- Compare the voltage indications for the PID [FUEL_PRES] with the standard in the table indicated below.
- If they match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION )
VOLTAGE SPECIFICATIONS (STANDARD)FUEL_PRES V MPa {kgf/cm2, psi} Approx. 1.4 10 {102, 1450}