LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Remove the front bumper component >> Fastener B Removal Note

Fastener B Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Turn over front under cover No. 1 until fasteners B can be removed.
  2. Remove fasteners B.
scientia non olet · About LEMON Manuals