LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2024
>>
CX-90 Turbo Select
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 3 (Engine Control System (VIN A) (1 Of 2))
>>
Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL]
>>
Remove Passenger Side Strut Tower Bar
>>
Wiring harness clip removal note
Wiring harness clip removal note
WARNING:
This page is about a different variant/trim than selected.
Remove the wiring harness clips as shown in the figure below.
Courtesy of MAZDA MOTORS CORP.