LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Remove Passenger Side Front Splash Shield No. 2 >> Front splash shield No. 2 removal note

Front splash shield No. 2 removal note

WARNING: This page is about a different variant/trim than selected.
  1. Move the front splash shield No. 2 in the direction of the arrow shown in the figure below, remove the front splash shield No. 2 tab from the engine mount.
G16707240Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals