LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Remove Passenger Side Edge Rubber >> Edge rubber removal note

Edge rubber removal note

WARNING: This page is about a different variant/trim than selected.
  1. Partially peel back the cowl grille weatherstrip until the A-pillar trim can be removed.
    G16699193Courtesy of MAZDA MOTORS CORP.
  2. Remove the edge rubber.
scientia non olet · About LEMON Manuals