LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Remove Inverter Bracket >> Bolt installation note

Bolt installation note

WARNING: This page is about a different variant/trim than selected.
  1. Install the bolts as shown in the figure below.
Fig 1: Inverter Bracket Bolts Tightening Sequence
G16699283Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Symbol Content
(1) (2)... Servicing procedure
Temporarily tighten
26 N.m {2.65 kgf.m, 19.2 ft.lb}
scientia non olet · About LEMON Manuals