LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Remove Driver's Side Seal Plate >> Driver's side seal plate installation note

Driver's side seal plate installation note

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the driver's side seal plate is inserted into the intake air guide (lower) groove and engaged.
G16699238Courtesy of MAZDA MOTORS CORP.