LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Remove Center Seal Plate

Remove Center Seal Plate

WARNING: This page is about a different variant/trim than selected.
  1. Remove using the procedure shown in the figure below.
G16699231Courtesy of MAZDA MOTORS CORP.
PART NAME DESCRIPTION

Step Part name
1 Fasteners
2 Fasteners
3 Center seal plate
scientia non olet · About LEMON Manuals