LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation [PYUL] >> Disconnect Motor Cable (Inverter Side)

Disconnect Motor Cable (Inverter Side)

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Motor Cable (Inverter Side) Bolt With Torque Specifications
G16707301Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Bolt 11 N.m {110 kgf.cm, 95 in.lb}
2 Bolt 11 N.m {110 kgf.cm, 95 in.lb}
3 Motor cable (inverter side) -
scientia non olet · About LEMON Manuals