LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Pressure Sensor Inspection [PYUL] >> Inspect Engine Oil Pressure Sensor >> PID/data monitor inspection

PID/data monitor inspection

WARNING: This page is about a different variant/trim than selected.
  1. Connect the M-MDS to the DLC-2.
  2. Switch the main power ON (READY on).
  3. Using the M-MDS, select data monitor item [OIL_PRES]. (Refer to [PID/DATA MONITOR INSPECTION ] in the Troubleshooting Service Information)
  4. Measure the voltage at engine oil temperature sensor/engine oil pressure sensor terminal D when the PID [OIL_PRES] increases.
scientia non olet · About LEMON Manuals