LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Oil Level Sensor Removal/Installation [PYUL] >> Remove Engine Oil Level Sensor

Remove Engine Oil Level Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Engine Oil Level Sensor Bolt With Torque Specifications
G16707133Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Bolt 9 N.m {92 kgf.cm, 80 in.lb}
2 Engine oil level sensor -
scientia non olet · About LEMON Manuals