Remove Engine Coolant Temperature Sensor No. 2: Notes

WARNING: This page is about a different variant/trim than selected.

Fig 1: Engine Coolant Temperature Sensor No. 2 With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

TIGHTENING TORQUE SPECIFICATIONS

Step	Part name
1	Connector	-	16.5 N.m {1.7 kgf.m, 12.15 ft.lb}
2	Electric water pump No. 1 (See ELECTRIC WATER PUMP NO. 1 REMOVAL NOTE )	-	-
3	Connector	-	-
4	ECT Sensor No. 2	-	16.5 N.m {1.7 kgf.m, 12.15 ft.lb}
5	Gasket	Replacement part	-