LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Coolant Temperature (ECT) Sensor Removal/Installation [002] >> Drain Engine Coolant (Main)

Drain Engine Coolant (Main)

WARNING: This page is about a different variant/trim than selected.
  1. Open the coolant reserve tank cap.
    G16707113Courtesy of MAZDA MOTORS CORP.
    COMPONENT OPERATIONS

    Component No Refer to
    1 Coolant reserve tank cap
  2. Drain the engine coolant (main) from the coolant reserve tank.
  3. Remove the drain plug (main) and drain the engine coolant (main).
    G16707114Courtesy of MAZDA MOTORS CORP.
    COMPONENT OPERATIONS

    Component No Refer to
    1 Drain plug (main)
  4. Install the drain plug (main).
scientia non olet · About LEMON Manuals