LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (VIN A) (1 Of 2)) >> Engine Coolant Temperature (ECT) Sensor Removal/Installation [001] >> Remove Engine Coolant Temperature Sensor No. 1

Remove Engine Coolant Temperature Sensor No. 1

WARNING: This page is about a different variant/trim than selected.
  1. Remove in the order indicated in the table.
Fig 1: Engine Coolant Temperature Sensor No. 1 With Torque Specifications
G16707101Courtesy of MAZDA MOTORS CORP.
TIGHTENING TORQUE SPECIFICATIONS

Step Part name
1 Connector - -
2 ECT Sensor No. 1 - 16.5 N.m {1.7 kgf.m, 12.15 ft.lb}
3 O-ring Replacement part -
scientia non olet · About LEMON Manuals